hFOB 1.19 cell line人成骨細胞株永生化細胞-BioVector NTCC質粒載體菌種細胞蛋白抗體基因保藏中心
- 價 格：￥19532
- 貨 號：hFOB 1.19 cell line人成骨細胞株永生化細胞
- 產 地：北京
- BioVector NTCC典型培養物保藏中心
- 聯系人：Dr.Xu, Biovector NTCC Inc.
電話：400-800-2947 工作微信:1843439339 (QQ同號)
手機：18901268599
地址：北京
- 已注冊
hFOB 1.19 cell line
Organism: Homo sapiens, humanTissue:
boneCell Type: osteoblast? SV40 large T antigen transfected
CSF1PO: 10,13D13S317: 11,12
D16S539: 9,13D5S818: 11,12
D7S820: 8,10THO1: 7,9.3
TPOX: 11vWA: 16,18
Cytogenetic Analysis: diploid, 43%? tetraploid, 57%
The base medium for this cell line is a 1:1 mixture of Ham's F12 Medium Dulbecco's Modified Eagle's
Medium,with 2.5 mM Lglutamine (without phenol red).
To make the complete growth medium, add the following components to the base medium: 0.3 mg/ml G418? fetal bovine serum to a final concentration of 10%.
The flask was seeded with cells, grown, and completely filled with medium to prevent loss of cells during shipping.
1. Upon receipt, visually examine the culture for macroscopic evidence of any microbial contamination. Using an inverted microscope (preferably equipped with phase-contrast optics), carefully check for any evidence of microbial contamination. Also, check to determine if the majority of cells are still attached to the bottom of the flask? during shipping the cultures are sometimes handled roughly and many of the cells often detach and become suspended in the culture medium (but are still viable).
2. If the cells are still attached, aseptically remove all but 5 to 10 mL of the shipping medium. The shipping medium can be saved for reuse. Incubate the cells at 37°C in a 5% CO2 in air atmosphere until they are ready to be subcultured.
3. If the cells are not attached, aseptically remove the entire contents of the flask and centrifuge at 125 x g for 5 to 10 minutes. Remove shipping medium and save. Resuspend the pelleted cells in 10mL of this medium and add to 25 cm2 flask. Incubate at 34°C in a 5% CO2 in air atmosphere until cells are ready to be subcultured.
To insure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at 70°C. Storage at 70°C will result in loss of viability.
1. Thaw the vial by gentle agitation in a 37°C water bath. To reduce the possibility of contamination, keep the Oring and cap out of the water. Thawing should be rapid (approximately 2 minutes).
2. Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
3. Transfer the vial contents to a centrifuge tube containing 9.0 mL complete culture medium and spin at approximately 125 x g for 5 to 10 minutes.
4. Resuspend cell pellet with the recommended complete medium (see the specific batch information for the culture recommended dilution ratio) and dispense into a 25 cm2 or a 75 cm2 culture flask. It is important to avoid excessive alkalinity of the medium during recovery of the cells. It is suggested that, prior to the addition of the vial contents, the culture vessel containing the complete growth medium be placed into the incubator for at least 15 minutes to allow the medium to reach its normal pH (7.0 to 7.6).
5. Incubate the culture at 34°C in a suitable incubator. A 5% CO2 in air atmosphere is recommended if using the medium described on this product.
Volumes used in this protocol are for 75 cm2 flasks? proportionally reduce or increase amount of dissociation medium for culture vessels of other sizes.
1. Remove and discard culture medium.
2. Briefly rinse the cell layer with 0.25% (w
) Trypsin0.53 mM EDTA solution to remove all traces of serum which contains trypsin inhibitor.
3. Add 2.0 to 3.0 mL of Trypsin EDTA solution to flask and observe cells under an inverted microscope until cell layer is dispersed (usually within 5 to 15 minutes).
Note: To avoid clumping do not agitate the cells by hitting or shaking the flask while waiting for the cells to detach. Cells that are difficult to detach may be placed at 37°C to facilitate dispersal.
4. Add 6.0 to 8.0 mL of complete growth medium and aspirate cells by gently pipetting.
5. Add appropriate aliquots of the cell suspension to new culture vessels.
6. Incubate cultures at 34°C.
Subcultivation ratio: A subcultivation ratio of 1:4 is recommended. Medium renewal: Every 2 to 3 days.
Cat No.: NTCC592275
BioVector NTCC質粒載體菌種細胞蛋白抗體基因保藏中心www.nedfriskphoto.com
Organism: Homo sapiens, humanTissue:
boneCell Type: osteoblast? SV40 large T antigen transfected
Age: fetus
Growth Properties: adherent
DNA Profile:Amelogenin: XCSF1PO: 10,13D13S317: 11,12
D16S539: 9,13D5S818: 11,12
D7S820: 8,10THO1: 7,9.3
TPOX: 11vWA: 16,18
Cytogenetic Analysis: diploid, 43%? tetraploid, 57%
The base medium for this cell line is a 1:1 mixture of Ham's F12 Medium Dulbecco's Modified Eagle's
Medium,with 2.5 mM Lglutamine (without phenol red).
To make the complete growth medium, add the following components to the base medium: 0.3 mg/ml G418? fetal bovine serum to a final concentration of 10%.
The flask was seeded with cells, grown, and completely filled with medium to prevent loss of cells during shipping.
1. Upon receipt, visually examine the culture for macroscopic evidence of any microbial contamination. Using an inverted microscope (preferably equipped with phase-contrast optics), carefully check for any evidence of microbial contamination. Also, check to determine if the majority of cells are still attached to the bottom of the flask? during shipping the cultures are sometimes handled roughly and many of the cells often detach and become suspended in the culture medium (but are still viable).
2. If the cells are still attached, aseptically remove all but 5 to 10 mL of the shipping medium. The shipping medium can be saved for reuse. Incubate the cells at 37°C in a 5% CO2 in air atmosphere until they are ready to be subcultured.
3. If the cells are not attached, aseptically remove the entire contents of the flask and centrifuge at 125 x g for 5 to 10 minutes. Remove shipping medium and save. Resuspend the pelleted cells in 10mL of this medium and add to 25 cm2 flask. Incubate at 34°C in a 5% CO2 in air atmosphere until cells are ready to be subcultured.
To insure the highest level of viability, thaw the vial and initiate the culture as soon as possible upon receipt. If upon arrival, continued storage of the frozen culture is necessary, it should be stored in liquid nitrogen vapor phase and not at 70°C. Storage at 70°C will result in loss of viability.
1. Thaw the vial by gentle agitation in a 37°C water bath. To reduce the possibility of contamination, keep the Oring and cap out of the water. Thawing should be rapid (approximately 2 minutes).
2. Remove the vial from the water bath as soon as the contents are thawed, and decontaminate by dipping in or spraying with 70% ethanol. All of the operations from this point on should be carried out under strict aseptic conditions.
3. Transfer the vial contents to a centrifuge tube containing 9.0 mL complete culture medium and spin at approximately 125 x g for 5 to 10 minutes.
4. Resuspend cell pellet with the recommended complete medium (see the specific batch information for the culture recommended dilution ratio) and dispense into a 25 cm2 or a 75 cm2 culture flask. It is important to avoid excessive alkalinity of the medium during recovery of the cells. It is suggested that, prior to the addition of the vial contents, the culture vessel containing the complete growth medium be placed into the incubator for at least 15 minutes to allow the medium to reach its normal pH (7.0 to 7.6).
5. Incubate the culture at 34°C in a suitable incubator. A 5% CO2 in air atmosphere is recommended if using the medium described on this product.
Volumes used in this protocol are for 75 cm2 flasks? proportionally reduce or increase amount of dissociation medium for culture vessels of other sizes.
1. Remove and discard culture medium.
2. Briefly rinse the cell layer with 0.25% (w
) Trypsin0.53 mM EDTA solution to remove all traces of serum which contains trypsin inhibitor.3. Add 2.0 to 3.0 mL of Trypsin EDTA solution to flask and observe cells under an inverted microscope until cell layer is dispersed (usually within 5 to 15 minutes).
Note: To avoid clumping do not agitate the cells by hitting or shaking the flask while waiting for the cells to detach. Cells that are difficult to detach may be placed at 37°C to facilitate dispersal.
4. Add 6.0 to 8.0 mL of complete growth medium and aspirate cells by gently pipetting.
5. Add appropriate aliquots of the cell suspension to new culture vessels.
6. Incubate cultures at 34°C.
Subcultivation ratio: A subcultivation ratio of 1:4 is recommended. Medium renewal: Every 2 to 3 days.
您正在向 biovector.net 發送關于產品 hFOB 1.19 cell line人成骨細胞株永生化細胞-BioVector NTCC質粒載體菌種細胞蛋白抗體基因保藏中心 的詢問
- 公告/新聞
